Call Us Today! 1300 547 581|info@karemwoodcraft.uniquewebmarketers.com
  • 1-17 tread – Premium pair stair stringers with Batton Screws – KLPRSTAIR1

    1-17 TREAD – PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KLPRSTAIR1

    Code: KLPRSTAIR1

    Description

    These Stringers are available within our Premium Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 290 x 45mm LOSP pine (environmentally friendly timber).
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm.
    • DISTANCE FROM ELEVATED PLATFORM 380mm
    • 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • ASSEMBLY INSTRUCTIONS INCLUDED.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLPRSKIT Custom made height rises also available.

    Details
  • Complete DIY stair kit – 240mm tread to suit residential use

    COMPLETE DIY STAIR KIT – 240MM TREAD TO SUIT RESIDENTIAL USE

    Code: KLSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • Complete DIY stair kit – 290mm tread to suit commercial and residential use

    COMPLETE DIY STAIR KIT – 290MM TREAD TO SUIT COMMERCIAL AND RESIDENTIAL USE

    Code: KLPRSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • 1-18 Tread Pair Domestic Use Stringers with Batten Screws

    1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS

    Code: KLSTAIR1

    Description

    These Stringers are available within our Domestic Stair range.

    Includes:

    • Pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 240 x 45mm LOSP pine (environmentally friendly timber).
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLSKIT. Custom made height rises also available.

    Details
  • 1-18 Tread pair domestic use stringers with Batten screws – KMSTAIR1

    1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS – KMSTAIR1

    Code: KMSTAIR1

    Description

    These Stringers are available within our Domestic Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 240 x 42mm MERBAU 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMSKIT. Custom made height rises also available.

    Details
  • Complete DIY stair kit – KMPRSKIT

    COMPLETE DIY STAIR KIT – KMPRSKIT

    Code: KMPRSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 42mm MERBAU.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • Complete DIY Stair Kit – KMSKIT

    COMPLETE DIY STAIR KIT – KMSKIT

    Code: KMSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 42mm MERBAU.

    Includes:

    • Stringers, Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • Window & Door Shutters – WDSH

    WINDOW / DOOR SHUTTERS – WDSH

    Code: WDSH

    Description

    Our timber Windows & Door Shutters are perfect for keeping out the rain as well as direct sunlight whilst still admitting light and air. Made from LOSP Treated Pine - Which has 25 year guarantee against rot, fungal decay and insect attack (see our FAQs for more details on painting).

    Includes:

    • Silver Top Ash: Complies with the BAL 29 fire rating -Cedar

    The illustration shows 1 way of using block louver panels above the door allowing for ventilations. The general use is for verandahs for privacy, air flows and shade.

    Application

    Matching service available custom sizes available

    Details
  • Timber Louvres – TIML

    TIMBER LOUVRES – TIML

    Code: TIML

    Description

    Our timber fixed Louvers are perfect for keeping out the rain as well as direct sunlight whilst still admitting light and air. Made from LOSP Treated Pine - Which has 25 year guarantee against rot, fungal decay and insect attack (see our FAQs for more details on painting).

    Includes:

    • Silver Top Ash: Complies with the BAL 29 fire rating -Cedar.

    The illustration shows 1 way of using block louver panels above the door allowing for ventilations. The general use is for verandahs for privacy, air flows and shade.

    STANDARD SIZE:

    • 85mm by 17mm slats / 90mm by 42mm frame.
    • Supplied in a flat pack or manufactured as a full panel.

    Application

    Custom sizes available.

    Details
  • Gable Vent – GVHR

    GABLE VENT – GVHR

    Code: GVHR

    Description

    Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

    Includes:

    • Straps attached for easy installation
    • 720 x 420mm.
    • Flush mount with a recess of 28mm
    • Slats are 20 x 9mm.

    Moulding will sit 17mm out from wall.

    Application

    Custom made shapes and sizes available upon request.

    Details
  • Placeholder

    GABLE VENT – GVSQ

    Code: GVSQ

    Description

    Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

    Includes:

    • Straps attached for easy installation
    • 450 x 510mm.
    • Flush mount with a recess of 28mm
    • Slats are 20 x 9mm.

    Moulding will sit 17mm out from wall.

    Application

    Custom made shapes and sizes available upon request.

    Details
  • Gable Vent – GVOCT

    GABLE VENT – GVOCT

    Code: GVOCT

    Description

    Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

    Includes:

    • Straps attached for easy installation
    • 450 x 510mm.
    • Flush mount with a recess of 28mm
    • Slats are 20 x 9mm.

    Moulding will sit 17mm out from wall.

    Application

    Custom made shapes and sizes available upon request.

    Details
  • Placeholder

    GABLE VENT – GVH6

    Code: GVH6

    Description

    Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

    Includes:

    • Straps attached for easy installation
    • 450 x 510mm.
    • Flush mount with a recess of 28mm
    • Slats are 20 x 9mm.

    Moulding will sit 17mm out from wall.

    Application

    Custom made shapes and sizes available upon request.

    Details
  • Gable Vent – GVRND600

    GABLE VENT – GVRND600

    Code: GVRND600

    Description

    Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

    Includes:

    • Straps attached for easy installation
    • 600mm diameter
    • Flush mount with a recess of 28mm
    • Slats are 20 x 9mm

    Moulding will sit 17mm out from wall.

    Application

    Custom made shapes and sizes available upon request.

    Details
  • Gable Infill – GI1

    GABLE INFILL – GI1

    Code: GI1

    Description

    Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

    Application

    Other designs available upon request.

    Details
  • Gable Infill – GI2

    GABLE INFILL – GI2

    Code: GI2

    Description

    Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

    Application

    Other designs available upon request.

    Details
  • Gable Infill – GI3

    GABLE INFILL – GI3

    Code: GI3

    Description

    Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

    Application

    Other designs available upon request.

    Details
  • Gable Infill – GI4

    GABLE INFILL – GI4

    Code: GI4

    Description

    Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

    Application

    Other designs available upon request.

    Details
  • Gable Infill – GI5

    GABLE INFILL – GI5

    Code: GI5

    Description

    Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

    Application

    Other designs available upon request.

    Details
  • Gable Infill – GI6

    GABLE INFILL – GI6

    Code: GI6

    Description

    Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

    Application

    Other designs available upon request.

    Details
  • Gable Infill – GI7

    GABLE INFILL – GI7

    Code: GI7

    Description

    Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

    Application

    Other designs available upon request.

    Details
  • Gable Finial – F1970

    GABLE FINIAL – F1970

    Code: F1970

    Description

    Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

    Includes:

    • This finial is 900 long x 70 x 70mm.
    • Top turning = 250mm
    • Square section = 550mm.
    • Bottom turning = 100mm.
    Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

    Application

    Custom sizes catered for.

    Details
  • Gable Finial – F2970

    GABLE FINIAL – F2970

    Code: F2970

    Description

    Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

    Includes:

    • This finial is 900 long x 70 x 70mm.
    • Top turning = 325mm
    • Square section = 425mm.
    • Bottom turning = 150mm.
    Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

    Application

    Custom sizes catered for.

    Details
  • Gable Finial – F3970

    GABLE FINIAL – F3970

    Code: F3970

    Description

    Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

    Includes:

    • This finial is 900 long x 70 x 70mm.
    • Top turning = 425mm
    • Square section = 365mm.
    • Bottom turning = 110mm.
    Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

    Application

    Custom sizes catered for.

    Details
Go to Top